Call Us 1300 781 701

A4404 - Vibration Analyzer

Be the first to review this product

Small size, lightweight and full compatibility with the A4400 - VA4 Pro instrument. The module can be connected to any portable computer unit.

Availability: In stock

Only 1 left
$0.00
Call 1300 781 701 For Deal

Product Description

The A4404 - SAB module is convenient for service and analytical operations. The module is identical to the input part of the A4400 - VA4 Pro instrument, which is designed for processing of the measured signal. When the module A4404 - SAB is connected to any computer by USB and the software VA4 Pro is running, you will get the same measuring system as the A4400 – VA4 Pro instrument. Technical features, the number of channels, the possibility of the measurement and data processing are the same as in the A4400 – VA4 Pro instrument. The module is powered directly by USB connection so no external power is needed.

The appreciable advantage of the A4404 - SAB is the small size, lightweight and full compatibility with the A4400 - VA4 Pro instrument. The module can be connected to any portable computer unit and after starting the VA4 Pro software the measuring process can be started immediately.

System

Unit modes Analyser – analytic measurement
Data-collector – route measurement
Balancer – on-site balancing
Run up / Coast down measurement
Recorder – signal recording
Stethoscope
FASIT -expert system for fault detection
Octave analyzer
Bump test
Processor According to PC
Memory, Route According to PC hard drive
Data processing FFT real time analysis
DEMOD – ENVELOPE analysis
ACMT – low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Signal Recorder 64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording – 35 hours
Trigger Manual, external, signal level, time
Use for signal recording trigger
Speed change, time interval

Measurement

Input channels 4 AC, ICP® power supply on/off
4 DC for process values
1 TACHO for external trigger
Input range AC +/- 12 V peak-peak
DC +/- 24 V
AD conversion 24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N 120 dB
Frequency ranges max. 90 kHz (1 Ch, 196 kHz sampling)
max. 25 kHz (4 Ch, 64 kHz sampling)
min. 25 Hz (4 Ch, 64 Hz sampling)
FFT resolution min. 100 lines
max. 3 276 800 lines
Temperature range -10˚C to +50˚C

Interface

Communication USB

Interface

Power USB Powered
Case Aluminium Heavy Duty
Size & Weight 110 x 115 x 35 mm
350 g

Reviews

Write Your Own Review

You're reviewing: A4404 - Vibration Analyzer

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating