Heavy Duty Complete Industrial pH System

Main Features:

• Very High Chemical Resistance Characteristics
• Preamplifier for superior signal quality and strength
• High Mechanical Strength
• High Level Backend Waterproofing

Part Number: 6631

Configuration: 3/4" - 1" MNPT Integrated, Sulfide Resistant pH Sensor, Slurry Resistant pH Sensor, Acid/Fluoride Resistant pH Sensor

General Specifications:

• pH Range: 0 to 14 pH
• Temperature Range: -5 to +105 °C
• Pressure Range: 1 to 100 psia (6.9 to 690 kPa absolute)
• Body Material: Ultem (Poly-Ether-Imide)
• Junction Material: Kynar (Poly-Vinylidene-Fluoride)
• Dimensions: Drawing <6-1>
• Cable: RG 174/U Coaxial (without preamplifier)
• Connector: BNC (unless otherwise specified)

pH Sensor Specifications:

• Measuring Glass Type: Hemispherical, Green Glass (MUGG)
• Dimensions: 0.310, (7.8 mm) DIA
• Initial Impedance: Less than 800 MOhms @ 25 o C
• Sodium Ion Error: Less than 0.15 pH in 1.0 M Na+ Concentration at pH 14.00
• Acidic Error: Less than 0.05 pH in 1.0 M HCl @ 0.00 pH
• Reference System Specifications:
• Type: Double Junction
• Reference Half Cell: Ag/AgCl, Saturated KCl
• Primary Junction: Porous Ceramic, Sulfide resistant crosslinked polymer
• Secondary Junction: Porous Kynar, Sulfide resistant crosslinked polymer
• Surface Area: 366,000 mil2 (236 mm2)

Special Features:

Sulfide resistant crosslinked polymer is resistant to heat, solvents and to most chemicals. It also slows the diffusion of sulfide ions and traps them before reaching the reference half cell. Sensor holds an excess of a salt mixture, assuring saturation at all temperatures and extending in situ sensor life. The reference system holds a generous supply of aqueous saturated salt mixture, eliminating effects of intruding contaminants and permits the sensor to be left in dry condition for extended periods of time.

Recommended Applications:

• Wastewater treatment, chemical processes, pollution control, refinery water, management and treatment, oil drilling, measurements where long service life or operation at remote locations where (no) low maintenance is required.
• Abrasive slurries, high viscosity stock in food, paper, paper pulp and mining industries.
• Fluoride containing wastewater, etching solutions, pollution control devices, where long service life or operation at remote locations where (no) low maintenance is required.

Storage and Shelf Life: At room temperature with closed protector cap, 1 year from date of manufacture.

Standard Hook-Up Options: With Preamp - Multiconductor Lead Wires

Model 2TX Single Channel pH, ORP & Temperature Meter & Analyzer

• pH/ORP MEASUREMENT & CONTROL
• USER SELECTABLE ATC PROBE
• (PT-1000, 10K THERMISTOR & 3K BALCO)
• REVERSIBLE AND ISOLATED 4-20 mA OUTPUT
• BUMPLESS CALIBRATION
• -10 TO + 120 ^o C TEMPERATURE COMPENSATION
• CUSTOM DESIGN LARGE DISPLAY LCD
• MEMBRANE SWITCH WITH AUDIO FEEDBACK
• AUTOMATIC TEMPERATURE COMPENSATION
• HIGH 50/60 Hz NOISE REJECTION
• POWER DOWN MEMORY BACK-UP
• WATERTIGHT IP65 1/4 DIN ENCLOSURE
• PROGRAMMABLE DELAY FOR WASH RELAY
• CE APPROVED

DOES NOT INCLUDE MOUNTING HARDWARE.