Call Us 1300 781 701

Turtle Tough TT-Cu-pH Copper pH Sensor

Be the first to review this product

Acid/Fluoride, Slurry, Sulphide, and Organic Resistant

Availability: In stock

$1,095.00
$1,095.00
Exc. GST

Product Description

TT-Cu-pH Copper pH Sensor

SKU: TT-Cu-pH-2107

The Turtle Tough pH Sensor for Copper is not a one size fits all approach. Arguably our most application specific sensor we tailor it to meet the requirements of each individual installation.  Unnecessary resistance elements can compromise both price and performance, so for this tough application we only put in what you absolutely need.

Copper ores are typically concentrated by either froth flotation or hydrometallurgical extraction, both of which have unique process challenges. Froth flotation is wrought with measurement difficulties; surfactants will coat measurement elements and report incorrect results where xanthates will continuously attack probe bodies and measurement elements, rendering sensors unusable very quickly. Copper oxide ores are typically leached with sulphuric acid and subsequently refined further via solvent extraction, with acids, sulphides and solvents all aggressively attacking all elements of the sensor.

The standard sensor is supplied with high levels of chemical resistance, including sulphide and dissolved gas resistance. Optionally, if the application requires we use solvent resistant sealants and different body plastics depending on the solids content of the ores. With this often tough application we are continuously evaluating each installation to ensure we supply the most robust and accurate sensor for copper ore processes.

Digital Smart Sensor Technology (DSST)

This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration dataanalyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations.  This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.

Key Feature

  • 6m cable
  • RADEL Body, 3/4x 1” MNPT
  • -5°C to 105°C
  • Triple Junction
  • Acid/Fluoride Resistant
  • AmmoniaChlorine & Sulphide Resistant
  • Organic & Solvent Resistant (optional)
  • High Capacity KYNAR Reference
  • Digital smart sensor technology (optional)
    • No hard wiring - plug-n-play connectivity
    • Sensor stores calibration data, analyser configuration and sensor history
    • Hot-swap for quick sensor change-out
    • No interaction with analyser - sensor data auto uploads

Additional Information

Additional Information

Specifications

Specifications

General Specifications

Description

pH Sensor for Copper

Part Number

TT-Cu-pH-2107

pH Range

0 to 14 pH

Temperature Range

-5 to 105°C

Pressure

6.9 to 1035 kPa (1 to 150 psig)

Body Type

RADEL (Poly-Phenyl-Sulfone) with ¾”  Front End – 1”  Back End MNPT

Junction Material

KYNAR (Poly-Vinylidene-Fluoride)

Dimensions

216mm Length, Maximum Diameter 33.3mm

Cable Length

6m

Temperature Compensation

Pt1000

Preamplifier

Not Fitted

Waterproofing

Immersible, Submersible if threaded on sealed immersion rod with sufficient sealing tape

Connection

Hard Wired Tinned Leads for Sensor & TC

Special Features

Acid/Fluoride, Slurry, Sulphide, Organic and Resistant

pH Sensor Specifications

Measuring Glass Type

Hemispherical, Green Glass (MUGG)

Glass Dimensions

8.0mm (0.315”) Diameter

Initial Impedance

< 800 M Ohms @ 25°C

Sodium Ion Error

< 0.15 pH in Na⁺ solutions at pH 14.00

Acidic Errors

< 0.05 pH in HCl solutions at 0.00 pH

Reference System Specifications

Type

Triple Junction

Reference Half Cell

Ag/AgCl, Saturated KCl

Primary & Secondary Junction

Porous Ceramic, Saturated KCl in Cross-linked polymer, interfaced to Tertiary Junction

Tertiary Junction

Solid-State Non-Porous Cross-Linked Polymer embedded in Kynar Support Matrix holds excess KCl assuring saturation at all temps for stability & long sensor service life.

Application Specifications

Recommended Applications

Specifically designed for the Copper industry.  Any process media containing free sulfide species such as hydrogen sulfide gas (H2S), hydrogen sulfide (HS-) or sulfide ions (S2-). Any measurement where aggressive chemical cleaning is needed to remove fouling or low-maintenance operation is required with minimal cleaning and re-calibration.

Analyser / Interface

All Turtle Tough pH Analysers

Storage

Item should be kept at room temperature with closed protector cap, filled with storage solution in an upright position. Shelf life warranted for 12 months from the date of purchase.

Warranty

12 Month Conditional Warranty

 
Application Aquaculture, Chemical Processing , Food & Dairy, Laboratory, Pulp & Paper, Soil & Fertilisers, Water & Wastewater, Mining Slurries, High Cyanide, Titanium Dioxide, Solvent Extraction
Duty Cycle Moderate, Heavy, Ultra

Reviews

Write Your Own Review

You're reviewing: Turtle Tough TT-Cu-pH Copper pH Sensor

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating