Call Us 1300 781 701

Turtle Tough TT-GP-ORP-VI Submersible ORP Sensor

Be the first to review this product

Acid/Fluoride, Slurry and Sulphide Resistant

Availability: In stock

$1,195.00
$1,195.00
Exc. GST

Product Description

GP-VI Submersible ORP Sensor

SKU: TT-GP-ORP-3006

The GP-VI Submersible ORP Sensor is designed to go under… completely!  The unique back end assembly allows sealing to be run down the length of the cable; completely isolating it from the process media and eliminating the risk of ingress or poisoning. This allows for very long life at deep submersion in even the most aggressive processes without needing to seal the sensor onto an immersion rod.  The flexible cable sealing actually allows a sensor to be lowered into a tank or process directly by the cable itself, without any supporting structure. Turtle Tough has designed unique and proprietary sensor guide tubes to facilitate this optional installation method, eliminating the need for heaving and cumbersome immersion rods.

The RYTON body plastics provide a cost effective resistance to chemical attack, and the high capacity KYNAR reference supports both chemical and temperate resistance.  Utilising our proprietary toughened glass the sensor is ideal for slurries and abrasive media as well as being capable of resisting acids or fluorides that may chemically attack the glass.

The GP-VI Submersible ORP Sensor is a popular configuration and demanded by many applications. As such this sensor is available in many optional configurations including high impact break resistant glass, ultra high temperature, dissolved gas and volatile organic solvent resistant, high HF acid resistant, brine and extreme dehydration resistance.

This sensor is ideal for any applications where process media containing free sulphide species such as hydrogen sulphide gas (H2S), hydrogen sulphide (HS-) or sulphide ions (S2-). Any measurement where aggressive chemical cleaning is needed to remove fouling or low maintenance operation is required with minimal cleaning and recalibration.

Digital Smart Sensor Technology (DSST)

This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration dataanalyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations.  This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.

Key Features

  • 6m cable
  • RYTON Body, ¾” x 1” MNPT
  • -5°C to 105°C
  • Submersible Water proofing & Cable Sealing
  • Acid/Fluoride Resistant
  • Slurry & Sulphide Resistant
  • High Capacity KYNAR Reference
  • Proprietary toughened glass
  • Wide range of optional configurations
  • Optional “Sensor Guide Tubes” eliminate need for immersion rod
  • Digital smart sensor technology (optional)
    • No hard wiring – plug-n-play connectivity
    • Sensor stores calibration data, analyser configuration and sensor history
    • Hot-swap for quick sensor change-out
    • No interaction with analyser – sensor data auto uploads

Additional Information

Additional Information

Specifications

Specifications

General Specifications

Description

GP-VI Submersible ORP Sensor

Part Number

TT-GP-ORP-3006

mV Range

-2,000 to +2,000 mV

Temperature Range

-5 to 105°C

Pressure

6.9 to 690 kPa (1 to 100 psig)

Body Type

RYTON (Poly-Phenylene-Sulfone)  with ¾” Front End – 1” Back End MNPT

Junction Material

KYNAR (Poly-Vinylidene-Fluoride)

Dimensions

216mm Length, Maximum Diameter 33.3mm

Cable Length

6m

Temperature Compensation

Pt1000

Preamplifier

Not Fitted

Waterproofing

Submersible

Connection

Hard Wired Tinned Leads for Sensor & TC

Special Features

Acid/Fluoride, Slurry, Sulphide and Organic Resistant

ORP Sensor Specifications

Measuring Glass Type

Platinum Ball in Low Profile Configuration

Glass Dimensions

5.0mm (0.197”) Diameter

Reference System Specifications

Type

Double Junction

Reference Half Cell

Ag/AgCl, Saturated KCl

Primary Junction

Porous Ceramic, Saturated KCl in Cross-linked polymer, interfaced to Secondary Junction

Secondary Junction

Solid-State Non-Porous Cross-Linked Polymer embedded in Kynar Support Matrix holds gross excess KCl assuring saturation at all temps for stability & long sensor service life.

Application Specifications

Recommended Applications

Any process media where the redox (ORP) potential is monitored or controlled. Can be combined with other sensor options available for pH sensors such as high temperature resistant, slurry & viscous material resistant, acid fluoride & HF resistant, pulp and paper resistant, sulfide resistant, dissolved gas and organic solvent resistant or saturated brine resistant. Any measurement where aggressive chemical cleaning is needed to remove fouling or low-maintenance operation is required with minimal cleaning and re-calibration.

Analyser / Interface

All Turtle Tough ORP Analysers

Storage

Item should be kept at room temperature with closed protector cap, filled with storage solution in an upright position. Shelf life warranted for 12 months from the date of purchase.

Warranty

12 Month Conditional Warranty

Application Aquaculture, Chemical Processing , Food & Dairy, Laboratory, Pulp & Paper, Soil & Fertilisers, Water & Wastewater, Mining Slurries, High Cyanide, Titanium Dioxide, Solvent Extraction
Duty Cycle Moderate, Heavy, Ultra

Reviews

Write Your Own Review

You're reviewing: Turtle Tough TT-GP-ORP-VI Submersible ORP Sensor

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating