Call Us 1300 781 701

Turtle Tough TT-HF-pH Acid Etching pH Sensor

Be the first to review this product

Acid/Fluoride, Slurry, Sulphide, and Organic Resistant, High HF Resistant

Availability: In stock

Only 1 left
$1,095.00
$1,095.00
Exc. GST

Product Description

TT-HF-pH Acid Etching pH Sensor

SKU: TT-HF-pH-2109

The Turtle Tough Acid Etching pH Sensor has been specifically designed for acid fluoride etching solutions or fluoride wastewater treatment systems where low pH conditions may exist or strong acid cleaning is required to remove fouling from sensor.

Our proprietary glass sensing element is designed to resist etching from acid fluoride and high HF and is renown for its performance and longevity in these demanding applications.

The 3/4" x 1" MNPT Ryton body is highly resistant to chemical attack and is extremely cost effective.

Digital Smart Sensor Technology (DSST)

This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration dataanalyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations.  This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.

Key Features

  • 6m cable
  • RYTON Body, 3/4"x 1” MNPT
  • -5°C to 105°C
  • High HF Resistant
  • Acid/Fluoride Resistant
  • Ammonia, Chlorine and Sulphide Gas Resistant
  • High Capacity KYNAR Reference
  • Proprietary toughened glass
  • Digital smart sensor technology
    • No hard wiring - plug-n-play connectivity
    • Sensor stores calibration data, analyser configuration and sensor history
    • Hot-swap for quick sensor change-out
    • No interaction with analyser - sensor data auto uploads

Additional Information

Additional Information

Specifications

 

Specifications

General Specifications

Description

pH Sensor for Acid Etching

Part Number

TT-HF-pH-2109

pH Range

0 to 14 pH

Temperature Range

-5 to 105°C

Pressure

6.9 to 690 kPa (1 to 100 psig)

Body Type

RYTON (Poly-Phenylene-Sulfone) with ¾”  Front End – 1”  Back End MNPT

Junction Material

KYNAR (Poly-Vinylidene-Fluoride)

Dimensions

216mm Length, Maximum Diameter 33.3mm

Cable Length

6m

Temperature Compensation

Pt1000

Preamplifier

Not Fitted

Waterproofing

Immersible, Submersible if threaded on sealed immersion rod with sufficient sealing tape

Connection

Hard Wired Tinned Leads for Sensor & TC

Special Features

Acid/Fluoride, Slurry, Sulphide, and Organic Resistant, High HF Resistant

pH Sensor Specifications

Measuring Glass Type

Hemispherical, Green Glass (MUGG)

Glass Dimensions

8.0mm (0.315”) Diameter

Initial Impedance

< 800 M Ohms @ 25°C

Sodium Ion Error

< 0.15 pH in Na⁺ solutions at pH 14.00

Acidic Errors

< 0.05 pH in HCl solutions at 0.00 pH

Reference System Specifications

Type

Double Junction

Reference Half Cell

Ag/AgCl, Saturated KCl

Primary Junction

Porous Ceramic, Saturated KCl in Cross-linked polymer, interfaced to Secondary Junction

Secondary Junction

Solid-State Non-Porous Cross-Linked Polymer embedded in Kynar Support Matrix holds excess KCl assuring saturation at all temps for stability & long sensor service life.

Application Specifications

Recommended Applications

Specifically designed for Acid Etching.  Any process media containing free sulfide species such as hydrogen sulfide gas (H2S), hydrogen sulfide (HS-) or sulfide ions (S2-). Any measurement where aggressive chemical cleaning is needed to remove fouling or low-maintenance operation is required with minimal cleaning and re-calibration.

Analyser / Interface

All Turtle Tough pH Analysers

Storage

Item should be kept at room temperature with closed protector cap, filled with storage solution in an upright position. Shelf life warranted for 12 months from the date of purchase.

Warranty

12 Month Conditional Warranty

Please see www.turtletough.com.au/support/warranty-returns 

 
Application Aquaculture, Chemical Processing , Food & Dairy, Laboratory, Pulp & Paper, Soil & Fertilisers, Water & Wastewater, Mining Slurries, High Cyanide, Titanium Dioxide, Solvent Extraction
Duty Cycle Moderate, Heavy, Ultra

Reviews

Write Your Own Review

You're reviewing: Turtle Tough TT-HF-pH Acid Etching pH Sensor

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating