Call Us +61 (0)3 8846 2900

Turtle Tough TT-WW-pH Waste Water pH Sensor

Be the first to review this product

Acid/Fluoride, Slurry, Sulphide, and Organic Resistant

Availability: In stock

Only 1 left
$0.00
Call 1300 781 701 For Deal

Product Description

TT-WW-pH Waste Water pH Sensor

SKU: TT-WW-pH-2105

The Turtle Tough Waste Water pH sensor is unlike anything the waste water market has ever seen before. This space has been dominated by glorified lab electrodes being passed off as “industrial” units and expectations of performance and serviceability are generally low. The Turtle Tough Waste Water pH Sensor will challenge those expectations with its unique formulation to resist fouling, dehydration and provide a service life well beyond those competitors.

Continuous monitoring of waste water presents many challenges across the mining and manufacturing industries. For many facilities, inconsistent flows mean that sensors can dry out if not installed correctly, causing premature failures and ruining measurements. Additionally, there are often contaminants in waste water that will interfere with accurate measurements such as grease or oils that clog references and other components that will coat the measurement elements of sensors.

Turtle Tough sensors are specifically designed for your individual waste water monitoring requirements. The Extreme dehydration option allows sensors to be left dry for very long periods of time and still respond instantly and dynamically on re-entry to solution. This solution has been a huge windfall for manufacturers with batch processes or variable waste water flows, reducing sensor failure and man hours spent removing and changing sensors. Coat resistant sensor elements and general physical strength allow for strong mechanical cleaning of sensors that have been fouled by inorganic material or surface coatings, further increasing sensor lifetime in the field.

Digital Smart Sensor Technology (DSST)

This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration dataanalyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations.  This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.

Key Feature

  • 6m cable
  • RYTON Body, 3/4x3/4” MNPT
  • -5°C to 105°C
  • Coat resistant materials reduce fouling
  • Acid/Fluoride Resistant
  • Ammonia, Chlorine and Sulphide Gas Resistant
  • High Capacity KYNAR Reference
  • Extreme Dehydration (optional)
  • Proprietary toughened glass
  • Digital smart sensor technology (optional)
    • No hard wiring - plug-n-play connectivity
    • Sensor stores calibration data, analyser configuration and sensor history
    • Hot-swap for quick sensor change-out
    • No interaction with analyser - sensor data auto uploads

Additional Information

Additional Information

Specifications

Specifications

General Specifications

Description

pH Sensor for Waste Water

Part Number

TT-WW-pH-2105

pH Range

0 to 14 pH

Temperature Range

-5 to 70°C

Pressure

6.9 to 690 kPa absolute (1 to 100 psig)

Body Type

RADEL (Poly-Phenyl-Sulfone) with ¾” MNPT Front & Back End

Junction Material

HDPE (High-Density Polyethylene)

Dimensions

211mm Length, Maximum Diameter 26.7mm

Cable Length

6m

Temperature Compensation

Pt1000

Preamplifier

Not Fitted

Waterproofing

Immersible, Submersible if threaded on sealed immersion rod with sufficient sealing tape

Connection

Hard Wired Tinned Leads for Sensor & TC

Special Features

Acid/Fluoride, Slurry, Sulphide and Organic Resistant

pH Sensor Specifications

Measuring Glass Type

Hemispherical, Green Glass (MUGG)

Glass Dimensions

8.0mm (0.315”) Diameter

Initial Impedance

< 800 M Ohms @ 25°C

Sodium Ion Error

< 0.15 pH in Na⁺ solutions at pH 14.00

Acidic Errors

< 0.05 pH in HCl solutions at 0.00 pH

Reference System Specifications

Type

Double Junction

Reference Half Cell

Ag/AgCl, Saturated KCl

Primary Junction

Porous Ceramic, Saturated KCl in Cross-linked polymer, interfaced to Secondary Junction

Secondary Junction

Solid-State Non-Porous Cross-Linked Polymer embedded in HDPE Support Matrix holds excess KCl assuring saturation at all temps for stability & long sensor service life.

Application Specifications

Recommended Applications

Industrial, chemical, food & beverage, semiconductor, pharmaceutical & wastewater. Any measurement where aggressive chemical cleaning is needed to remove fouling or low-maintenance operation is required with minimal cleaning and re-calibration.

Analyser / Interface

All Turtle Tough pH Analysers

Storage

Item should be kept at room temperature with closed protector cap, filled with storage solution in an upright position. Shelf life warranted for 12 months from the date of purchase.

Warranty

12 Month Conditional Warranty

 
Application Aquaculture, Chemical Processing , Food & Dairy, Laboratory, Pulp & Paper, Soil & Fertilisers, Water & Wastewater, Mining Slurries, High Cyanide, Titanium Dioxide, Solvent Extraction
Duty Cycle Moderate, Heavy, Ultra

Reviews

Write Your Own Review

You're reviewing: Turtle Tough TT-WW-pH Waste Water pH Sensor

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating